Downhole self-contained combined tool GEO-6 descends into the well on the wire and produces up to seven registration parameters (pressure PRES, temperature TEMP, gamma-rays GK, bottom flow-meter FLOW, additional upper flow-meter FLO2 or capacitance water holdup VL, casing collar locator CCLL, stream thermal indication STI).
One of the channels of the flowmeter can be reversible, i.e. to show the flow direction.
Information from the sensors is received in a block memory of the tool that stores data at all times during measurement. Tool powered by lithium batteries or accumulator.
For empowerment of GEO-6 additional module GEO-MS connects to the tool, which has additional channels such as capacitance water holdup, resistivity meter and thermometer.
Tool configuration can be different and depends on the number of channels, a range of pressure, a range of temperature and gas factor at work environment.
Binding the tool by depth can be produced by logging control system (SKK) or by a separate measurement depth unit (MU) with adapter MU-USB that connects directly to your computer.
The tool can be programmed to the different operating modes with selection of channels you need and set the delay of measurement, cycle and duration of each mode.